陕西海特克复合材料有限公司

公司简介

陕西海特克复合材料有限公司是中国玻纤企业——陕西华特（集团）公司的独资子公司。成立于1985年，专业从事玻璃钢复合材料产品的开发与生产。现拥有SMC片材、模压、拉挤、RTM（注射）、喷射及手糊等多种玻璃钢成型工艺。公司技术力量雄厚，设备先进，具有较强的产品开发及生产能力。产品广泛应用于汽车、通讯、铁路、公路、体育及游乐设施等诸多领域。公司秉承“顾客要求神圣，质量获取未来”的质量方针，以优质的产品、优良的服务和真诚的合作，赢得了新老用户的一致好评。（玻璃钢天线罩出口韩国、日本、印度等国。）

Introduction

Shaanxi HYTEC Composite Co., Ltd. is a exclusive investment subsidiary company of the Chinese famous fiberglass enterprise---HuaTek (Group) Corporation. HYTEC company is established in 1985, specially in charge of development and production for FRP composite material. HYTEC has many kinds of molding technologies for FRP, such as SMC sheet, compression, pultursion profiles, RTM (injection molding), spray-up and hand lay-up. Our company has an abundance of technology, advanced equipment, and a stronger capacity of development and production. Products used widely in the fields of automobile, communication, railway, expressway, sports and amusement facilities. With the faith of “consumer is primary, quality gains future ”, our products have been well accepted by consumers with excellent quality, the best service, and sincere cooperation.

一、 SMC模压生产线

公司SMC模压成型生产线建于1995年，拥有100吨到1800吨不同吨位的模压机五台，年可生产各种产品25万件以上。目前生产的SMC重卡汽车散热器罩、铁路信号箱系列产品、通讯用天线罩、电缆桥架、高速路防眩板、体育场看台座椅等产品，质量可靠，用户满意。

二、 SMC片材生产线

公司SMC片材生产线，年生产能力达万吨以上。可生产普通型、阻燃型、低密度型、可透波型、电器型等多种不同用途的片材。其性能指标优良，质量稳定，从而保证了模压产品的质量要求。

三、 连续拉挤生产线

公司拥有数条性能优良的拉挤生产线，主要从事通讯用天线罩及各种形材的研发与生产，特别在开发通讯用天线罩的过程中取得突破，形成优势。生产的薄壁大口径（Φ250、厚度3mm）天线罩，国内首创，产品受到国内外用户的一致好评。

四、 喷射、手糊生产线

喷射是我们1986年引进美国的玻璃钢成型工艺，专门从事大型、异型玻璃钢产品的开发与生产。结合传统的手糊工艺，先后开发生产了大型游乐设施水滑道、乒乓球台面、篮球板、大型天线罩等产品，其中中国南戴河连续多年的水滑道游乐设施均为我们生产。产品质量水平，国内。

 SMC Compression Molding Production Line

SMC compression molding production line was built in 1995, possessed different press for 5 pieces from 100 tons to 1800 tons, annual production capacity is above 250-thousand pieces. At present our main products, including SMC radiatior guard for truck, signal box for railway, antenna cover for communication, crane span structure for electric cable, fender for expressway, and FRP chairs for stadium, have been well accepted by consumer in excellent quality.

 SMC Sheet Production Line

SMC sheet production line has annual production capacity of more than 10-thousand tons. We can provide many SMC sheets for different uses, such as ordinary sheet, flame retardant sheet, low density sheet, microwave transmissible sheet, and electronic sheet. Since their good specifications and stable quality, the quality requirement for SMC compression molding product has been guaranteed.

 Continuous Pultrusion Production Line

We have a few of FRP continuous pultrusion production line, specialized to in charge of development and production for communication antenna cover and all kinds of profiles. We have been special superior in processing FRP antenna cover for communicaiton. The antenna cover of thin thickness and big calibre (Φ250、thickness 3mm ) is the only new product in our country.. Meanwhile, the products have been well accepted by consumers from internal and external country.

 Spray-up and Hand Lay-up Production Line

The spray-up is our first technical process, introduced from the United States in 1986. specialized in developing and producing of large and profiled FRP products. Combining the traditional hand lay-up technology, we have developed slide chute for large amusement facility, table top for table tennis, backboard for basketball, large antenna cover. The slide chutes of the Nandaihe in China is produced by our company for these years. The quality of our products is in the lead level in domestic market.